Step 3: Load Paper
Length guide
lever
Paper size indicators
.
Paper capacity
mark
Loading a Paper Tray
Squeeze here
Length guide
Complete these instructions to load print materials
into any of the standard or optional trays. All paper
trays are loaded in the same way.
1
Remove the paper tray.
2
Squeeze the width guide lever and slide the
width guide to the far right side of the tray.
3
Squeeze the length guide lever and slide the
Width guide
length guide to the correct position for the
size paper you are loading.
4
Place the paper into the paper tray with the
recommended print side face down for
single-sided printing and face up for double-
Squeeze here
sided printing. Do not fill paper above the
paper capacity mark (fill line).
5
Squeeze the width guide lever and slide the
Width guide
width guide to the left until it lightly rests
against the edge of the paper stack
6
Adjust the knob to show the size of the
paper currently loaded.
Note: This setting serves as a visual reminder
7
Reinstall the tray.
Knob
only; it has no effect on the operation of
the printer.
Load Paper
19