Lexmark Optra Optra T Setup Manual page 31

AppleTalk
Your network printer works automatically with AppleTalk networks. You simply
connect the power and the network cables, and you're up and running.
However, if you would like to use a zone and printer name different from the
defaults you can use MarkVision for Macintosh to change these settings.
Note: MarkVision for Macintosh resides on the Drivers, MarkVision, and Utilities
AppleTalk network printing
The following steps must to be done for each Macintosh user on the AppleTalk
network who wants to use the printer.
1
Note: A PPD file customizes the LaserWriter driver for your particular printer
2
3
OS/2 Warp
Your network printer works on OS/2 Warp Server networks. Users can print to the
Server
network printer from any client that can successfully attach to the network.
For instructions on configuring the print server for OS/2 networks, look on the
Drivers, MarkVision, and Utilities CD, click View Documentation and look for the
MarkNet link.
CD.
In the Chooser, select the new printer, and then click Create. If the system
cannot find the appropriate PPD file to associate with the new printer, pro-
vide the necessary information yourself. For example, if prompted, specify
which options are installed on the printer, such as duplex, memory, and so
forth. Click OK when you are finished.
model.
Look for an icon to appear in the Chooser next to the printer name. This
means a PPD is associated with the network printer. A new desktop printer
icon is placed on your desktop, too.
In the Chooser, select the printer you want to use now, then close the
Chooser window.
Configure Network Printer 29