Lexmark Optra Optra T Setup Manual page 10

Attaching Decals to Paper Trays
8 Install Paper Options and Printer
Attaching the Paper Bail
Note: Attach the paper bail to the top cover only if
you do not plan to install a 5-bin mailbox as
the top output option.
1
Remove the top cover of the printer and
slide the plastic bracket onto the static brush
holder. Adjust the bracket so it is centered
over the exiting paper.
2
Place the tips of the wire paper bail into the
ends of the plastic bracket so that the bail
curves downward.
3
Replace the top cover.
Decals showing the number "1" are on your printer
and the standard input tray as shown. These
decals keep the standard input tray paired with the
printer.
If you purchased an Optra T616(n) or T614n
printer, or optional drawers, you received a sheet
of decals.
Peel the decals from the sheet and attach them to
the recessed areas on the drawer and the match-
ing tray as shown.