Step 7: Verify Printer Setup; Printing A Menu Settings Page; Printing A Network Setup Page - Lexmark T630 Setup Manual

Step 7: Verify printer setup

Printing a menu
settings page
Note:
For more information
about using the printer
operator panel and changing
menu settings, refer to the
Publications CD.
Printing a network
setup page
The Menu Settings page lists all the options you purchased or
installed. If a feature or an option is not listed, you need to check your
installation. The Network Setup page provides information that is
needed if you are attaching your printer to a network.
This is also a good time to print Quick Reference information. See
"Printing Quick Reference information" on page 55.
Print a menu settings page to review the default printer settings and to
verify that printer options are installed correctly.
1
Make sure the printer is on.
2
Press Menu until you see Utilities Menu, and then press Select.
3
Press Menu until you see Print Menus, and then press Select to
print the page. The message Printing Menus appears on the
display.
4
Verify that the options you installed are correctly listed under
"Installed Features."
If an option you installed is not listed, turn the printer off, unplug
the power cord, and reinstall the option. See Step 3: "Install
memory and option cards" on page 30 for more information.
5
Verify the amount of memory installed is correctly listed under
"Printer Information."
6
Verify that the trays are configured for the sizes and types of
print media you loaded.
If the printer is attached to a network, print a network setup page to
verify the network connection. This page also provides important
information that helps you configure for network printing.
Verify printer setup
54