Setting Up The Printer; Granting Access To The Software During Installation; Setting Up The Printer As A Copier Only Or Fax Only - Lexmark X7675 User Manual

Setting up the printer

Granting access to the software during installation

Third-party applications, including antivirus, security, and firewall programs may alert you about the printer software
being installed. For your printer to work properly, you must grant access to the printer software.

Setting up the printer as a copier only or fax only

Use the following instructions if you do not want to connect the printer to a computer.
Note: If you want to connect the printer to a computer, use the setup documentation and the printer software CD
that came with the printer.
1
Unpack the printer.
Notes:
•
Place the printer near the computer during setup. If you're setting up on a wireless network, you may move
the printer after setup is complete.
•
Contents, such as the number of print cartridges, may vary by model and region.
•
Do not attach the USB cable until prompted to do so.
1 Power cord
Telephone cord
2
3 Printer software CD
USB cable or installation cable
4
Note: Your printer model may not ship with a USB cable. Purchase a USB cable separately.
9
8
7
6
Setting up the printer
W
I
PR F
INT ING I
4
5
13
1
2
3