Printing Photos From A Digital Camera Using Dpof - Lexmark X7675 User Manual

12
Press or
When you select color or black-only printing, the light nearest your choice comes on.
13
Press to print the photos.
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For
best results, remove each printed sheet individually from the paper exit tray, and then allow the prints to dry at least
24 hours before stacking, displaying, or storing.

Printing photos from a digital camera using DPOF

Digital Print Order Format (DPOF) is a feature available on some digital cameras. If your camera supports DPOF, then
you can specify which photos to print, how many of each, and the print settings while the memory card is still in the
camera. The printer recognizes these settings when you insert the memory card into the printer or connect the
camera to the printer.
Note: If you specify a photo size while the memory card is still in the camera, then make sure that the size of the
paper loaded in the printer is not smaller than the size you specify in the DPOF selection.
1
Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side,
then see the instructions that came with the paper.)
2
Insert a memory card.
When the printer detects the memory card, the message Memory Card Detected appears on the printer
control panel display.
3
Press the up or down arrow button until Print Photos is highlighted, and then press OK.
4
Press the up or down arrow button until Print Camera Selections (DPOF) is highlighted, and then
press to print the photos.
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For
best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24
hours before stacking, displaying, or storing.
to set a color or black-and-white print.
Working with photos
100