Copying; Making Copies; Copying Photos - Lexmark X7675 User Manual

Copying

Making copies

1
Load paper.
2
Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
•
Adjust the paper guide on the ADF tray to the width of the original document.
•
When using the scanner glass, close the top cover to avoid dark edges on the scanned image.
3
From the printer control panel, press
4
Press the left or right arrow button to select the number of copies, and then press
or black-and-white copy.
When you select color or black-only printing, the light nearest your choice comes on.
5
Press .

Copying photos

1
Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side,
then see the instructions that came with the paper.)
2
Place a photo facedown on the scanner glass.
Note: When using the scanner glass, close the top cover to avoid dark edges on the scanned image.
3
From the printer control panel, press
4
Press the up or down arrow button until Photo Reprint is highlighted.
5
Press the left or right arrow button until the desired paper size appears. If your desired paper size is not on the
list, select Other. Additional paper size options appear on the display.
6
Press .
Note: Make sure you loaded photo paper into the printer.
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For
best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24
hours before stacking, displaying, or storing.
.
.
Copying
101
or to set a color