Resetting To Factory Settings - Lexmark X7675 User Manual

Resetting to factory settings

Resetting all settings
You can reset your printer to the original settings without using the printer menus.
Note: Resetting to factory default settings will delete all the printer settings you have previously selected.
1
Turn off the printer.
Note: Make sure the printer is not in Power Saver mode. Press and hold
If you have set the Power Saver timeout in the Setup menu, press and hold
the menu.
2
From the printer control panel, press and hold
Resetting menu settings
1
From the printer control panel, press
2
Press the up or down arrow button until Defaults is highlighted, and then press OK.
3
Press the up or down arrow button until Set Defaults is highlighted, and then press OK.
4
Press the up or down arrow button until Use Factory is highlighted, and then press OK.
5
Press OK again.
6
When prompted, press the up or down arrow button to select a language, and then press OK.
7
Press the up or down arrow button to select a country or region, and then press OK.
Initial Setup Complete appears on the display.
and , and then press
.
Maintaining the printer
129
for 2 seconds to turn off the printer.
according to the time you set in
to turn the printer on.