Advanced Wireless Setup; Creating An Ad Hoc Wireless Network - Lexmark X7675 User Manual

3
Add the printer (see "Add the printer" on page 55).
4
A second print queue will be created. Remove the wireless queue if you do not want to switch back to accessing
the printer over a wireless connection.
Note: The wireless interface of the printer is disabled while it is connected to an Ethernet network.
Printer currently set up locally (using USB connection)
1
Plug one end of an Ethernet cable into the printer and the other end into an available port on a switch or wall
jack.
2
Insert the software and installation CD into the computer you want to use to configure the printer.
3
Follow the on-screen instructions for configuring a printer on an Ethernet network.
Note: You will need a USB cable to complete the configuration.
Add the printer
In Mac OS X version 10.5
1
From the menu bar, click
2
Click Print & Fax under the Hardware section.
3
Click +.
4
Select the printer from the list and click Add.
In Mac OS X version 10.4 or earlier
1
From the Finder desktop, choose Go
depending on the operating system version you are using.
The Printer List dialog appears.
2
Choose the printer you want to use.
3
Click Add.
The Printer Browser appears.
4
Select your printer.
5
Click Add.

Advanced wireless setup

Creating an ad hoc wireless network

The recommended way to set up your wireless network is to use a wireless access point (wireless router). A network
set up this way is called an infrastructure network. If you have an infrastructure network, you should configure the
printer for use on that network.
Note: The printer can communicate on only one wireless network at a time. Configuring the printer for an ad hoc
wireless network will keep it from working on any other wireless network, either ad hoc or infrastructure.
Installing the printer on a wireless network (selected models only)
System Preferences.
Applications
55
Utilities Print Center or Printer Setup Utility,