Attaching A Usb Cable; Verifying The Usb Queue - Lexmark X422 Setup Manual

Attaching a
USB cable
Be sure to match the USB symbol on
the cable to the USB symbol on the
MFP.
Verifying the USB
queue
Mac OS X
A USB port is standard on the MFP.
Windows 98 SE, Windows Me, Windows 2000, Windows XP, and
Windows Server 2003 operating systems support USB connections.
Some UNIX, Linux, and Macintosh computers also support USB
connections. Refer to your computer operating system documentation
to see if your system supports USB.
To attach the MFP to a computer:
1
Connect the MFP to the computer using a USB cable.
A USB port requires a USB cable such as Lexmark part number
12A2405 (2 m [6.5 ft]). Be sure to match the USB symbol on the
cable to the USB symbol on the MFP.
2
Plug one end of the MFP power cord into the socket at the back
of the MFP and the other end into a properly grounded outlet.
3
Turn on your MFP.
After the MFP completes its internal tests, the Ready message
indicates that the MFP is ready to receive jobs.
If you do not see the Ready message on the display, refer to the
publications CD for instructions on clearing the message. Click
Printing, and then click Understanding MFP messages.
4
Turn on your computer and any other peripherals.
1
Open Print Center in the Finder. Print Center is located in the
Utilities folder (in the Applications folder).
2
Do one of the following:
If your USB-attached MFP appears in the Printer List, you can
quit Print Center. A queue has been created for your MFP.
If your USB-attached MFP does not appear in the Printer List,
make sure the USB cable is properly connected and the MFP is
Attach cables
36