Step 11: Verify Mfp Setup; Printing A Menu Settings Page - Lexmark X422 Setup Manual

Step 11: Verify MFP setup

Printing a menu
settings page
Note:
For more information
about using the MFP control
panel and changing menu
settings, refer to the
publications CD.
The menu settings page lists the default MFP settings and all the
options you purchased or installed. If a feature or an option is not
listed, you need to check your installation. For help printing the menu
settings page, see page 43.
The network setup page provides information that is needed if you are
attaching your MFP to a network. For help printing the network setup
page, see page 44.
If you set up your MFP as a local MFP (step 1 on page 1), this is a
good time to verify that your computer and MFP are communicating
properly. For help printing a test page, see page 44.
You can also print the Quick Reference and Clearing Jams
documentation at this time, so that you can easily reference this
information when necessary. For help printing the Quick Reference
documentation, see page 45.
Print a menu settings page to review the default MFP settings and to
verify that MFP options are installed correctly.
1
Make sure the MFP is on.
2
Press the administration button and then choose Print
Reports.
3
Choose Menu Settings Page, and then press
settings page prints automatically.
4
Verify that the options you installed are correctly listed under
"Installed Features."
If an option you installed is not listed, turn the MFP off, unplug
the power cord, and reinstall the option.
5
Verify the amount of memory installed is correctly listed under
"Device Information."
Verify MFP setup
43
. The menu