Windows - Lexmark X422 Setup Manual

Windows

Note:
Installing a custom
driver does not replace the
system driver. A separate
print object is created and
appears in the Printers
folder.
Using Windows Server
2003, Windows 2000,
Windows XP, and
Windows 98/Me
Note:
Some Windows
operating systems require
that you have administrative
access to install print drivers
on your computer.
Some Windows operating systems may already include a system
driver that is compatible with your MFP. This may seem automatic in
later versions of Windows. System print drivers work well for simple
printing, but they may contain less functionality than our enhanced
custom driver.
Use the drivers CD that shipped with your MFP to install the custom
print driver and obtain all of the enhanced print features and
functionality.
Drivers are also available in downloadable software packages on
Lexmark's Web site at www.lexmark.com.
1
Insert the drivers CD into your CD-ROM drive of your computer.
If the CD does not auto launch, click Start
type D:\Setup.exe in the Run dialog box.
2
Click Install Software.
3
Click Printer and Software.
4
Click Agree to accept the license agreement.
5
Select Suggested, and then click Next.
The Suggested option is the default installation for local and
attached setup. If you need to install utilities, change settings, or
customize device drivers, select Custom, and follow the
instructions on your screen.
6
Select Local Attached, and then click Next.
Follow the instructions on your screen to complete installing the
drivers.
What do I do next?
Task
After you have installed the drivers on your computer, you
are ready to set up the MFP.
Install drivers for local printing and scanning
2
Run, and then
Go to page...
5