Step 1: Install Drivers For Local Printing And Scanning - Lexmark X422 Setup Manual

Step 1: Install drivers for local
Note:
Use the drivers CD to
install your print and scan
drivers. Launch the CD and
follow the instructions to
install MFP software.
printing and scanning
For local printing and scanning, it is important that you install the
drivers for your multifunction printer (MFP) on your computer before
you install the actual hardware.
A local MFP is an MFP attached to your computer using a USB cable.
If your MFP is attached to a network instead of your computer, skip this
step and go to Step 2: "Unpack the MFP" on page 5.
A print driver is software that lets your computer communicate with
your MFP. The procedure to install drivers depends on the operating
system you are using.
A scan driver is software that lets you acquire and adjust a scan.
Again, the procedure to install drivers depends on the operating
system you are using.
Select your operating system from the following table to find driver
installation instructions.
Operating system
Windows Server 2003, Windows 2000,
Windows XP, Windows 98, and Windows Me
Note: Windows 95 and Windows NT are not
supported operating systems.
Macintosh
UNIX/Linux
* For local installation, do not attach a USB cable while your MFP and
computer are turned on. Install the drivers first.
Install drivers for local printing and scanning
1
Go to page...
2
3
4