Cover Disassembly - JLG 600A Service And Maintenance Manual

SECTION 3 - CHASSIS & TURNTABLE

Cover Disassembly

1. Remove O-ring (17) from groove in cover (6A).
2. Remove thrust washer (2) from cover (6A) pockets.
3. Unscrew two hex head bolts (6C) and remove disengage
cap (6B) from cover (6A).
4. Pull disengage rod (6D) out from cover (6A).
3-20
2. Thrust Washer 6D. Disengage Rod
6A. Cover 6E . O-Ring
6B. Disengage Cap 6F. Pipe Plug
6C. Bolt 17. O-Ring
Figure 3-15. Cover
5. Use appropriate tool to remove O-ring (6E) from internal
6. Remove two O-ring pipe plugs (6F) from cover (6A).
groove in cover (6A).
3121201