JLG 600A Service And Maintenance Manual page 35

SECTION 1 - SPECIFICATIONS
4. Wheel Drive Hub
Lube Point(s) - Level/Fill Plug
Capacity - 17 oz. (1/2 Full)
Lube - EPGL
Interval - Check level every 3 months or 150 hrs of oper-
ation; change every 2 years or 1200 hours of operation.
5. Hydraulic Return Filter
Interval - Change after first 50 hrs and every 6 months or
300 hrs thereafter or as indicated by Condition Indicator.
6. Hydraulic Charge Filter
Interval - Change after first 50 hrs and every 6 months or
300 hrs thereafter or as indicated by Condition Indicator.
1-12
7. Hydraulic Tank
NORMAL OPERATING
RANGE WITH BOOM
IN STOWED POSITION
Lube Point(s) - Fill Cap
Capacity - 31 gal. (117.3 L) Tank; 37.2 gal. (140.8 L)
System
Lube - HO
Interval - Check Level daily; Change every 2 years or
1200 hours of operation.
8. Suction Strainers (in tank)
REMOVE FILL CAP PLATE FROM TANK TO
GAIN ACCESS TO STRAINERS
Lube Point(s) - 2
Interval - Every 2 years or 1200 hours of operation,
remove and clean at time of hydraulic oil change.
9. Oil Change w/Filter - Ford LRG423
Lube Point(s) - Fill Cap/Spin-on Element
Capacity - 5 Quarts
Lube - EO
Interval - 3 Months or 150 hours of operation
Comments - Check level daily/Change in accordance
with engine manual.
3121201