LevelOne CamCon FCS-1060 User Manual page 72

IP CamSecure
Config
Setting – Hotline
*Hotline is only in IP CamSecure Pro/Pro Plus/Pro Mega.
Configure the settings of hotlines, including E-mail and telephone calls, once an unusual event is
detected.
E-mail: Input the following information: server, sender's E-mail address, E-mail's subject title, and
body content. You may click on the Send Test Mail button to test the settings.
Telephone: Select the modem that the system is going to dial the info call with, and then insert the
phone number.
Note: You may select a Wave format file; it will be played in the phone to alarm the person who
picks up the phone call.
* indicates mandatory areas
GSM modem: Select the Port and set Baud Rate of the GSM modem device, then enter PIN code.
You can setup the interval of send SMS message and enter the words which you want to send.
After all setup, you can click on Test Connection to send test SMS message.
Note: The interval is set to restrict the period of two SMS. If you set as 60 min, the SMS between
60 min would be deleted and didn't send to user.
71