LevelOne CamCon FCS-1060 User Manual page 45

IP CamSecure
Guard
Event - General Motion
Detect any movement in the defined detection zone.
Enable Event
Life Cycle
Activated Period
Basic Setting
Enable Event: Check the box to activate.
Life Cycle
Automatic cancel event when event disappears: the alarm/action will be off once the
abnormality is fixed or ends.
Manual cancel event or event last triggered: The alarm/action will continue until being cancel
from the Main Console (Start>Open Event Report>Cancel All). Therefore, when the user is
currently not at seat watching the screen he or she will be notified by the alarm.
Activated Period: You can set the system to react during certain time period; for example, office
hours.
44