LevelOne CamCon FCS-1060 User Manual page 46

IP CamSecure
Guard
Event - General Motion
Sensitivity
Interval
Region Definition
Start Simulation
Advanced setting
Sensitivity: Click and move the control bar to the right to increase sensitivity, that is, a relatively
small movement will trigger the alarm. Move to the left to reduce the sensitivity of movement
detection. Set up an appropriate Sensitivity value will reduce the chance of false alarm. For
example, you can lower the Sensitivity to avoid the alarm being triggered by a swinging tree in the
breeze.
Interval: Click and move the control bar to the right to increase interval time, so that the alarm will
only be triggered when the movement lasts longer. Move to the left to reduce the interval time.
Region Definition: To detect General Motion, you have to define a detection zone. Left-click and
drag, and draw a detection zone. You may define more than one zone on the screen by repeat the
process.
Start Simulation: Click Start Simulation bottom and test the function on the preview screen.
45