LevelOne CamCon FCS-1060 User Manual page 101

IP CamSecure
Remote Live Viewer
Setup Panel—Group
You may put different cameras into the same group when utilizing the Live Streaming Server
function.
Step 1: Go to the Group tab of the LiveView Setting panel.
Step 2: Log in to all the servers that contain the camera(s) you would like to put into the
group(s).
Step 3: Click "Insert" to create a new group; name the group for future reference.
Step 4: From the window at the right, highlight the camera(s) that you would like to add to a
group and then click on the "<--" button. Repeat the process until you are satisfied with the
group setting.
Step 5: Click on the Delete and Rename button to remove or rename a specific group.
Step 6: Repeat Step 3 to 5 until you are done with creating and setting groups.
Step 7: Click OK.
Note: If you want to Re-open the Remote Live Viewer on the secondary monitor, please enable the
Re-open Remote Live Viewer on 2
Step 3
Step 5
nd
Monitor.
Step 1 Step 4
Step 2
100