LevelOne CamCon FCS-1060 User Manual page 24

IP CamSecure
Playback
Unusual Event - General Motion
Sensitivity: Click and move the control bar to the right to increase sensitivity, that is, a relatively
small movement will trigger the alarm. Move to the left to reduce the sensitivity of movement
detection. Set up an appropriate Sensitivity value will reduce the chance of false alarm. For
example, you can lower the Sensitivity to avoid the alarm being triggered by a swinging tree in the
breeze.
Interval: Click and move the control bar to the right to increase interval time, so that the alarm will
only be triggered when the movement lasts longer. Move to the left to reduce the interval time.
Stop when found: Check the box, and the video will stop at the point
when a motion in the detection zone is detected. Otherwise, the video will
keep rolling and all the events detected will show on the list in Search Re-
sult box. Click on the listed event date/time, you will jump to the point in
the video where a motion is detected.
Click on the listed event date/
time, you will jump to the point
in the video where a motion is
detected.
23