LevelOne CamCon FCS-1060 User Manual page 37

IP CamSecure
Guard
Load
Camera / Channel
Day Mode
Day Mode
Schedule the cameras on a daily basis, which means that the recorder will be on and off, at the
same time every day, according to the same schedule you setup.
To setup the time schedule for each camera, you may
1. Load the preset Modes or
2. Insert a new schedule manually.
To load preset Modes
Click on the Load icon and get a pull-down menu.
Regular Mode: Record video 24 hours a day with the setting of 30 FPS (frames per second),
Normal video quality and Normal resolution.
Office Mode: Record video from 8 am to 8 pm (08:00 – 20:00, shown as a red bar on Schedule
Configuration panel) with 30 FPS, Normal video quality and Normal resolution.
Shop Mode: Record video from 10 am to 10 pm (10:00 – 22:00) with 30 FPS, Normal video
quality and Normal resolution.
High Security Mode: Record video 24 hours a day with the setting of 30 FPS, Highest video
quality and High resolution.
Disk Saving Mode: The system will start recording only when a motion on the screen is detected,
24 hours a day (shown as a green bar on Schedule Configuration panel), with the setting of 30 FPS,
Normal quality and Normal resolution. You can adjust the sensitivity, interval and detection area of
motion detection in schedule Configure
Minor Mode: The system will start recording only when a motion on the screen is detected, 24
hours a day (shown as a green bar on Schedule Configuration panel), with the setting of 15 FPS,
Low quality and Low resolution. You can adjust the sensitivity, interval and detection area of motion
detection in schedule Configure.
Adjust the scheduled setting: Although you have loaded the Modes by Load function, you can
still manually make some changes of it.
Option 1: Move the cruiser to the Time Bar to change the length of it or move the bar sideway to
change the start and stop points.
36