LevelOne IP Camera Quick Installation Guide Quick Installation Guide This QIG applies to:FCS-1010/1030/1040/1050/1060/1070/3000 WCS-2010/2030/2040/2060/2070...
Software Installation Please insert the CD-ROM that comes with the LevelOne IP camera packet. The installation page should pop up. If you do not see the pop up, please go into the CD-ROM directory and click on AutoRun.exe Click on “Install Software”.
Page 3
Please follow the wizard by clicking “Next”. Click on “Finish” to complete the installation.
Page 4
Click on the Installation Wizard on your Windows Desktop. Please choose the IP Camera by MAC address and click “Link to selected device”.
Page 5
Initial login will have a Window pop up, please click “yes”. Install Active X. Complete installation.
Page 6
Login to the web configuration page, click on Wireless LAN. Please press “save” after configuration, and then unplug your power cord and RJ-45 LAN cable. Insert Power cord, do not insert RJ-45 LAN cable. LevelOne IP camera should automatically connect to the preset AP.
Page 7
Surveillance System QIG Please insert the CD-ROM that comes with the LevelOne IP camera packet. The installation page should pop up. If you do not see the pop up, please go into the CD-ROM directory and click on AutoRun.exe. Click on “Installation Software”.
Page 8
Choose the Language, click “next”. Click “Next”. Click On I accept the terms and license agreement, click “Next”.
Page 9
Please enter User Name and Company Name. Choose Complete Install. “Next”.
Page 10
Click on “Install”. Click “Finish” to complete Installation.
Page 11
Start – Program – LevelOne - IP CamSecure - Main Console. Please enter the password and remember it.
Page 12
Click on Config – Setting. Click on Camera Tab,, Insert.
Page 13
Enter the IP address or DDNS of your IP camera, then user name and password. Click on “Auto Detect”. Click on OK when finishing Auto Detect.
Page 14
Complete. 32 Channels. IPCam Secure can support up to...