LevelOne CamCon FCS-1060 User Manual page 48

IP CamSecure
Guard
Event - Foreign Object
Sensitivity
Interval
Region Definition
Define object size
Start Simulation
Advanced setting
Sensitivity: Click and move the control bar to the right to increase sensitivity, that is, a relatively
small movement will trigger the alarm. Move to the left to reduce the sensitivity of movement
detection. Set up an appropriate Sensitivity value will reduce the chance of false alarm. For
example, you can lower the Sensitivity to avoid the alarm being triggered by a swinging tree in the
breeze.
Interval: Click and move the control bar to the right to increase interval time, so that the alarm will
only be triggered when the movement lasts longer. Move to the left to reduce the interval time.
Region Definition: Region Definition: To detect Foreign Object, you have to define a detection
zone and define the size of the object you want to detect. Left-click and drag, and draw the
detection zone (Region 1).
After defining detection zone, check the dot right beside Define object size, and then left-click and
drag and draw an area of the size of object you want to detect.
47