LevelOne CamCon FCS-1060 User Manual page 71

IP CamSecure
Config
Setting - PTZ Config
Basic Setting
Advanced Setting
Install the PTZ camera following the instruction of the manufacturer. The PTZ camera is usually
connected to the PC with RS-485/RS-422.
Check the box on the camera list to activate the PTZ control function of a PTZ camera.
Basic Setting: Select the camera model, com port, baud rate, and address according to your PTZ
camera.
Advanced Setting: You may setup the pan speed, tilt speed, zoom speed and auto pan speed.
Adjust the settings by dragging the bars.
70