Download/Upload Setup Using A Pc - AVE VSI-Pro Max Operation Manual

5. PROGRAMMING
To proceed with the DOWNLOAD/UPLOAD SETUP, we will configure the UNPROGRAMMED VSI-Pro first. From
the main-menu, press the "Up" or "Down" button to move the cursor to "DOWNLOAD/UPLOAD SETUP" and press
"Set". The following sub-menu will appear:
Press the "Up" or "Down" button to move the cursor to "DOWNLOAD SETUP" and press "Set". The following sub-
menu will appear. Move to the cursor to "DOWNLOAD SETUP" and press "Set" and the display "DOWNLOAD
SETUP..." will appear:
The UNPROGRAMMED VSI-Pro Max is now waiting to receive data from the PROGRAMMED VSI-Pro Max.
Now go to the main-menu of the PROGRAMMED VSI-Pro Max and follow the previous instructions to get to "UP-
LOAD SETUP" and press "Set". The following sub-menu will appear. Move to the cursor to "UPLOAD SETUP" and
press "Set" and the display "UPLOAD SETUP..." will appear:
The data transfer will begin and you will have a screen count down of the status that reads:
The count will end at 100. When this prompt clears the screen, the data transfer is complete. Press "Reset" to
exit this menu on both VSI-Pro Max's.
Now go to the main-menu of the previously UNPROGRAMMED VSI-Pro Max on the right side of the screen.
Enter the EXCEPTIONS menu. You should see your exceptions and other programmed data just as they were on the
original PROGRAMMED VSI-Pro Max.

DOWNLOAD/UPLOAD SETUP USING A PC

You can use a Laptop PC and AVE's IC, HyperTerminal or equivalent communications program to store data from a
VSI-Pro Max to a file. This file can then be uploaded to other VSI-Pro Max units with the same software revision level.
Use 38400,n,8,1 baud for the PC's baud rate.NOTE: This feature is only available to like versions and release.
Therefore you can only program a Ver. 14.00 R5 with a same exact VSI-Pro Max or errorenous data will occur.
VSI-Pro Max POS / Cash Register Interface
DOWNLOAD SETUP
UPLOAD SETUP
UPDATE FIRMWARE
EXIT
Figure 181: DOWNLOAD/UPLOAD SETUP Sub-Menu
DOWNLOAD SETUP
UPLOAD SETUP
UPDATE FIRMWARE
EXIT
DOWNLOAD SETUP ...
Figure 182: DOWNLOAD SETUP Sub-Menu & Display
DOWNLOAD SETUP
UPLOAD SETUP
UPDATE FIRMWARE
EXIT
UPLOAD SETUP ...
Figure 183: UPLOAD SETUP Sub-Menu & Display
Programmed VSI
UPLOADING ...
Unprogrammed VSI
DOWNLOADING ...
68
01
01