Clear Screen; Rts Triggered Text Delay; Set Triggered Text - AVE VSI-Pro Max Operation Manual

5. PROGRAMMING
DISPLAY TEXT
Choices: ON, OFF
Press the "Up" or "Down" button to move the cursor to "DISPLAY TEXT" and press "Set". The cursor will start
flashing. Press the "Up" or "Down" button to cycle through the values and press "Set" when the desired value is
displayed. Selecting "OFF" will not display any exception trigger text on the video output.
OUTPUT TEXT
Choices: ON, OFF
Press the "Up" or "Down" button to move the cursor to "OUTPUT TEXT" and press "Set". The cursor will start
flashing. Press the "Up" or "Down" button to cycle through the values and press "Set" when the desired value is
displayed. Selecting "OFF" will not send any exception trigger text to the serial port to DVR or Printer.
RTS TRIGGERED DELAY
Choices: OFF, 1S, 5S, 10S, 20S, 30S, 1M, 5M, 10M
Press the "Up" or "Down" button to move the cursor to "RTS TRIGGERED DELAY" and press "Set". The cursor will
start flashing. Press the "Up" or "Down" button to cycle through the values and press "Set" when the desired value is
displayed. Selecting "OFF" will give no delay and will trigger the alarm immediately upon RTS closure..
This function introduces a time delay for the RTS Trigger Input before initiating an alarm condition. The alarm must
be continuous for the entire time of the delay setting or the time out will be reset. This is useful to connect to cash
drawers or safe doors and wait a programmable amount of time before sounding the alarm. Leaving cash drawers or
safe doors open are indicative of theft or simple forgetfullness and an alarm condition will deter this behavior.
CLEAR SCREEN ON/OFF
Press the "Up" or "Down" button to move the cursor to "CLEAR SCREEN" and press "Set". Use "Up" or "Down" to toggle
between On or Off. When Clear Screen is "On" the Trigger Text is erased when the alarm time out is finished. If "Off" then
the Trigger Text remains on the screen and is scrolled with the normal transactions.

SET TRIGGERED TEXT

Press the "Up" or "Down" button to move the cursor to "SET TRIGGERED TEXT" and press "Set". The following sub-
menu will appear:
You can enter 2 lines with 40 alpha numeric text on each line. You can also enter non-printable data (control code)
instead of triggered text. Each control code occupies 3 charactors, therefore you can enter 13 control codes in a line.
To enter control code, first print up arrow ^ follwed by 2 hex digit. For example, hex code 01 has to be entered like ^
01. Press "Up" and "Down" simultaneously to exit. Trigger Text is added to the end of any text onscreen including normal
transactions. Therefore if you want the Trigger Text to be on its own line you will have to enter "^0D" which is HEX for LF
(linefeed) at the beginning of the Trigger Text string so you move to the next line to display the Trigger Text.
EXIT
Press the "Up" or "Down" button to move the cursor to "EXIT" and press "Set" to return to the previous menu.
VSI-Pro Max POS / Cash Register Interface
DISPLAY TEXT
OUTPUT TEXT
RTS TRIGGERED DELAY OFF

CLEAR SCREEN

SET TRIGGERED TEXT
EXIT
Figure 166: Set Triggered Text Sub-Menu
60
OFF
OFF