User Front Panel Controls; 4.1 Front Panel Controls; Programming - AVE VSI-Pro Max Operation Manual

The VSI-Pro Max is programmed by pressing and releasing specific combinations of the four front panel push buttons.
Via these four simple buttons, all of the powerful programming features of the Text Inserter are available. A video source
and a monitor must be connected in order to see the programming menus. If no video source or monitor is available you
can use the PC Programming Software to configure the VSI-Pro Max from the RS-232 port and any laptop.

4.1 FRONT PANEL CONTROLS

The front panel controls are provided to allow entry into the Programming Mode via the Main Menu, Access for PC
Programming without video connected and simple changing of the display's vertical and horizontal position and the gray
scale or border. The later eliminates the need of the user to enter the main menu and inadvertently change important
programming setups.
Entering the Main Menu
Hold in the "Down" and "Up" buttons simultaneously for longer than 3 seconds and the Main Menu will appear on the
video monitor. Release both buttons and continue to navigate the menus for programming.
Changing the Gray Scale
Figure 7: Four Front Pannel Push Buttons of VSI-Pro Max (Down)
1) Press and hold the "Down" button.
2) Press and release the "Reset" button.
3) Release the "Down" button.
4) Press "Down" or "Up" to select the Gray Scale.
5) When choice is made, press and release the "Set" button.
VSI-Pro Max POS / Cash Register Interface
Down
Up
Figure 6 : Four Front Panel Push Buttons of VSI-Pro Max
Down
Up

4. USER FRONT PANEL CONTROLS

Set Reset
Set Reset
15