Figure 59: Icl Sub-Menu; Figure 60: Icl 2000/4000 Sub-Menu; Figure 61: Icl 2000 Sub-Menu; Figure 62: Icl 3000 Sub-Menu - AVE VSI-Pro Max Operation Manual

ICL
Press the "Up" or "Down" button to move the cursor to
"ICL " and press "Set". The ICL menu will appear:
POS 2000/4000
POS 5000
EXIT

Figure 59: ICL Sub-Menu

ICL 2000/4000
Press the "Up" or "Down" button to move the cursor to
"POS 2000/4000 " and press "Set". The sub menu will
appear:
2000
3000 CUSTOMER DISPLAY
EXIT

Figure 60: ICL 2000/4000 Sub-Menu

ICL 2000
Press the "Up" or "Down" button to move the cursor to
"2000 " and press "Set". The sub menu will appear:
2000 - CBE
2000 - ISTORE
EXIT

Figure 61: ICL 2000 Sub-Menu

ICL 3000 CUSTOMER DISPLAY
Press the "Up" or "Down" button to move the cursor to
"3000 " and press "Set". The sub menu will appear:
TWO LINES
SCROLL
EXIT

Figure 62: ICL 3000 Sub-Menu

NOTE: The two line setting simulates exactly the cus-
tomer display since is only two lines and only shows the
two lines at any given time. If you select Scroll then the
display will scroll continuously like a normal receipt
printer.
VSI-Pro Max POS / Cash Register Interface
ICL 5000
Press the "Up" or "Down" button to move the cursor to
"POS 5000 " and press "Set". The sub menu will appear:
JOURNAL PRINTER
RECEIPT PRINTER
EXIT

Figure 63: ICL 5000 Sub-Menu

I-CNTRL INT JAVELIN VIPER
Press the "Up" or "Down" button to move the cursor to "I-
CNTRL INT JAVELIN VIPER " and press "Set". The sub
menu will appear.
DEVICE ADDRESS
ANY ADDRESS
EXIT
Figure 64: JAVELIN VIPER Sub-Menu
DISPLAY:
Device Address 1-999, press set to increment to the dig-
its and press UP and Down simultaneously to save the
address. Select "Any Address" On or Off.
- - - - PREVIOUS PAGE
ICR
J2 TOUCH SCREEN
JCM
KOPPENS GASPUMP
MEMS-5
MERIT
MICRELEC
MICROMAX
- - - - NEXT PAGE
EXIT
Figure 65: Register Selection Menu Page 6
JCM
Press the "Up" or "Down" button to move the cursor to
"JCM " and press "Set". The JCM menu will appear:
Gold 4800/4850
Gold G-225
Gold G-381
Gold-556
EXIT
Figure 66: JCM Sub-Menu
25
5. PROGRAMMING
000
ON