Appendix R : Time Sync & Alarm Sync - AVE VSI-Pro Max Operation Manual

APPENDIX R
Time Sync and Alarm Sync function within VSI-Pro Max and AVE RS-485 Network and MVDR3000/5000
Cash Register
MVDR3000 / MVDR5000
Figure 237: Connection Diagram of VSI-Pro Max AVE RS-485 Network with MVDR3000/5000
RS-485 Network of VSI-Pro Max with Time Sync Function for MVDR3000/5000
If the transaction which include time and date is sent out from the Cash Register and received by the VSI-Pro Max via the
Vnet protocol has occurred and The Time Sync function is enabled. The time and date of a DVR will synchronize with the
time and date of a VSI-Pro Max via the RS485 network.
To enable the Time Sync function. Access the Main Menu, press the "Up" or "Down" button to move the cursor to
"SCREEN SETUP" and press "Set" then move the cursor to "CLOCK" and press "Set" then move the cursor to "T/D
LOCKING" and press "Set". and then move the cursor to "TIME SYNC" and press "Set". The cursor will start flashing.
Press the "Up" or "Down" button to change the value is "ON" and press "Set" then back to the Main Menu. Press the "Up"
or "Down" button to move the cursor to "EXCEPTION REPORT" and press "Set" then move the cursor to "EXCEPTION
HISTORY" and press "Set" and then move the cursor to "DVR SELECTION" and press "Set". Press the "Up" or "Down"
button to move the cursor to "MVDR3000/5000" and press "Set". The MVDR3000/5000 sub-menu will appear:
Figure 238: MVDR3000/MVDR5000 Sub-Menu
Press the "Up" or "Down" button to move the cursor to "DEST ID" and press "Set". The cursor will start flashing. Press the
"Up" or "Down" button to change the value and press "Set" when the value of the "DEST ID" as identical with the "COMM
ID" or "UNIT ID"of the DVR, then move the cursor to "SRC ID" and press "Set". The cursor will start flashing. Press the
"Up" or "Down" button to change the value of "SRC ID" as 32 and press "Set" then back to the Main Menu.
RS-485 Network of VSI-Pro Max with Alarm Sync Function for MVDR3000/5000
If the alarm of VSI-Pro Max within the VSI-Pro Max AVE RS485 network is triggered and the Alarm Sync function is
enabled. The VSI-Pro Max will send command to DVR to trigger an alarm or start recording immediately.
To enable the Alarm Sync function. Access the Main Menu, press the "Up" or "Down" button to move the cursor to
"ALARM OUTPUTS" and press "Set" then move the cursor to "ALARM SYNC" and press "Set". the cursor will start
flashing. Press the "Up" or "Down" button to change the value is "ON" and press "Set" then back to Main Menu. Press the
"Up" or "Down" button to move the cursor to "EXCEPTION REPORT" and press "Set" then move the cursor to "EXCEPTION
HISTORY" and press "Set" and then move the cursor to "DVR SELECTION" and press "Set". Press the "Up" or "Down"
button to move the cursor to "MVDR3000/5000" and press "Set". The MVDR3000/5000 sub-menu will appear:
VSI-Pro Max POS / Cash Register Interface
VSI-Pro Max
RS232/
Slave
RS485
AVE
RS485
Network
RS232
VSI-Pro Max
99
TIME SYNC and ALARM SYNC
RS232/RS485
VSI-Pro Max
Slave
MVDR3000 1 POS
MVDR5000 4 POS
Up to 16 POS Max
Master
DEST ID
SRC ID
EXIT
Cash Register
1
32