Table of Contents
Advertisement
4. PROGRAMMING
4.11 RegCom-Pro Firmware Download
To update the RegCom-Pro, load the RegCom-Pro Firmware Download Utility and follow the instructions below. Then
select "UPDATE FIRMWARE" from the menu selection.
Figure 96: Update Firmware
Sub-Menu
RegCom-Pro Firmware Download Utility
This document describes the RegCom-Pro V14 Release 12. This feature allows a user to download firmware update via
the RS-232 port. The LDROM 4K boot strap loader must be burner to the uP via a conventional programmer. Then the
executable program is then loaded via any terminal program such as Hyper Terminal via a PC or compatible device. All
firmware files are encoded to the AVE proprietary format and decoded by the bootstrap loader for standard program
execution.
Update Firmware of RegCom-Pro
You have to connect the RegCom-Pro with a Serial Program Terminal such as HyperTerminal, IC etc. But advise to
use HyperTerminal.First, you have to set the baud rate HyperTerminal to 115,200.
See PC Windows below to verify proper HyperTerminal setup.
Figure 114: HyperTerminal Main Menu
RegCom-Pro POS / Cash Register Interface
58
Advertisement
Table of Contents
