AVE VSI-Pro Max Operation Manual page 100

TIME SYNC and ALARM SYNC
Figure 239: MVDR3000/MVDR5000 Sub-Menu
Press the "Up" or "Down" button to move the cursor to "DEST ID" and press "Set". The cursor will start flashing. Press the
"Up" or "Down" button to change the value and press "Set" when the value of the "DEST ID" as identical with the "COMM
ID" or "UNIT ID" of the DVR, then move the cursor to "SRC ID" and press "Set". The cursor will start flashing. Press the
"Up" or "Down" button to change the value of "SRC ID" as 32 and press "Set" then back to the Main Menu.
Time Sync and Alarm Sync Feature within the VSI-Pro Max and MVDR3000/MVDR5000 or compatible DVRs
CASH REGISTER
Cash Register DB9F
3 ------------------------------ 2
5 ------------------------------ 5
RS-485 Cash Register
A ------------------------------ 4
B ------------------------------ 6
VSI-Pro Max DB9M
3 ------------------------- 2
5 ------------------------- 5
Figure 240: Connection Diagram of VSI-Pro Max and Cash Register with MVDR3000/5000
VSI-Pro Max with Time Sync Function for MVDR3000/5000
If the transaction which include time and date is sent out from the Cash Register and received by the VSI-Pro Max has
occurred and The Time Sync function is enabled. The time and date of a DVR will synchronize with the time and date of
a VSI-Pro Max.
To enable the Time Sync function. Access to the "SCREEN SETUP" menu, select the "CLOCK" sub-menu then select
the "T/D LOCKING" sub-menu and then turns the Time Sync as "ON" then back to the Main Menu. Access to the
"EXCEPTION REPORT" menu ,select the "EXCEPTION HISTORY" sub-menu then select the "DVR SELECTION" sub-
menu and then select the "MVDR3000/5000" sub-menu. To enable MVDR3000/5000 support the TIME SYNC function,
set the "DEST ID" as identical with the "COMM ID" or "UNIT ID" of the DVR and set the "SRC ID" as 32.
VSI-Pro Max with Alarm Sync Function for MVDR3000/5000
If an any alarm of the VSI-Pro Max is triggered and the Alarm Sync function is enabled. The VSI-Pro Max will send
command to DVR to trigger an alarm condition on the DVR.
To enable the Alarm Sync function. Access the Main Menu, press the "Up" or "Down" button to move the cursor to
"ALARM OUTPUTS" and press "Set" then move the cursor to "ALARM SYNC" and press "Set". the cursor will start
flashing. Press the "Up" or "Down" button to change the value is "ON" and press "Set" then back to Main Menu. Access
to the "EXCEPTION REPORT" menu ,select the "EXCEPTION HISTORY" sub-menu then select the "DVR SELECTION"
sub-menu and then select the "MVDR3000/5000" sub-menu. To enable MVDR3000/5000 support the ALARM SYNC
function, set the "DEST ID" as identical with the "COMM ID" or "UNIT ID" of the DVR and set the "SRC ID" as 32.
VSI-Pro Max POS / Cash Register Interface
VSI-Pro Max DB9M
VSI-Pro Max DB9M
VIDEO OUT
DVR DB9F
RG-59U
100
DEST ID
SRC ID
EXIT
VSI-Pro Max
VIDEO OUT
VIDEO IN
RG-59U
VIDEO IN
APPENDIX R
1
32
VIDEO IN
CAMERA
RG-59U
MONITOR