List Of Error Codes - Asko DC7784HP.W.AU User Manual

LIST OF ERROR CODES

Describes relevant error codes for this product.
No.
ERROR 03
ERROR 04
ERROR 06
ERROR 12
To reset the alarm, hold down the START/STOP button for 5 sec.
32
859149au_en.indd 32 859149au_en.indd 32
Name
Fault on moisture
sensor
Max time process
Check water pump
Timeout
communication
Description
Sensor is outside its measurement
range.
Contact Service.
Max time for drying process exceeded
(pre-set value 240min can be changed
with parameter P 2073).
Water level in tray too high, has activated
switch at fl oat.
Contact Service.
The communication between user
interface and electronics has been
temporarily interrupted.
Contact Service.
17. 02. 2022 08:51:31 17. 02. 2022 08:51:31