Starting Drying Program - Asko DC7784HP.W.AU User Manual

STARTING DRYING PROGRAM

LAST USED DRYING PROGRAM
■
Press the on/off switch to the "ON" position - Indicated by the display lighting up
and showing the last run program.
If you want this, press START/STOP.
Or select another drying program by stepping through with the buttons ARROW UP
or ARROW DOWN.
Then start the drying program with the START/STOP button.
DOOR OPEN
■
If the door is open when a drying program is started and the START/STOP button is
activated, the display will show
Close the door, and the selected drying program will start.
IN OPERATION
■
The animated symbol (bar) on the left side of the display indicates that the drying
process is in progress.
CONDENSATION WATER TANK
■
If the condensation water tank becomes full, the drying process will be interrupted
immediately and the display will show
re-start the drying process.
COOLING
■
During the cool-down period the display shows the text
the remaining time (5 minutes).
859149au_en.indd 23 859149au_en.indd 23
"close door"
.
"check water tank"
. Empty the water tank and
"cool"
and a count-down of
17. 02. 2022 08:51:25 17. 02. 2022 08:51:25
23