Related Manuals for Asko DC7784HP.W.AU
Summary of Contents for Asko DC7784HP.W.AU
- Page 1 USER MANUAL Drying cabinet DC7784HP.W.AU Please read the user manual before using the appliance. 859149au_en.indd 1 859149au_en.indd 1 17. 02. 2022 08:50:25 17. 02. 2022 08:50:25...
- Page 2 ASKO off ers you all these features. When you buy an ASKO product you can be sure that the inside is just as good as the outside and that the ethics and morality that go into building this product are just as high as the quality and function you are getting.
-
Page 3: Table Of Contents
CONTENTS THIS USER MANUAL OPERATION User tips IMPORTANT SAFETY Drying programs INFORMATION Selection of drying program FOR A GOOD ENVIRONMENT Child lock Packaging materials Starting drying program Management of end-of-life drying Ending drying program cabinet Door opened DESCRIPTION OF THE DRYING OPTIMISING THE DRYING CABINET PROGRAM... -
Page 4: This User Manual
THIS USER MANUAL The contents of this user manual describe function, operation and optimisation of drying programs, as well as instructions for installation and maintenance. Alongside the ‘User Manual’ there is a ‘Service Manual’. 859149au_en.indd 4 859149au_en.indd 4 17. 02. 2022 08:50:44 17. -
Page 5: Information
IMPORTANT SAFETY INFORMATION This drying cabinet meets applicable safety requirements. Incorrect use may, however, lead to injuries and damage to objects. The advice and caution notices in this manual have been written to enable you to avoid incorrect use and unnecessary risks of accidents, and should be read before installing and using the drying cabinet. - Page 6 If the power cord is damaged, it must be immediately re- placed, and this must be done only by the manufacturer, the manufacturer’s service agent or similarly qualifi ed persons in order to prevent danger. Follow ASKO instructions in repair and replacement of parts. 859149au_en.indd 6 859149au_en.indd 6 17.
-
Page 7: For A Good Environment
FOR A GOOD ENVIRONMENT PACKAGING MATERIALS MANAGEMENT OF END-OF- LIFE DRYING CABINET The packaging that protects the drying cabinet against damage in transit has When the drying cabinet has reached been chosen with concern for the the end of its useful life, it must be environment in mind and is therefore taken to a recycling centre for disposal. -
Page 8: Cabinet
DESCRIPTION OF THE DRYING CABINET The ASKO DC7784HP drying cabinet The cabinet is a completely enclosed operates according to the heat pump system. No exhaust-air connection is principle with a dehumidifi er instead of required. The moisture is condensed a conventional hot-air unit. As a result, during the drying cycle. -
Page 9: Air Flow In The Cabinet
AIR FLOW IN THE CABINET Air intake in 6 rows of holes Cleaning fi lter below the shoe rack Air return after dehumidifi cation Enters a duct in the back of the drying cabinet Dehumidifier PLEASE NOTE Make sure that shoes and similar items do not block the airfl... -
Page 10: Control Panel
CONTROL PANEL DISPLAY ON / OFF The display has two rows with 6 characters on each row. During the drying OK/START/STOP process the selected drying program and a rolling bar indicating that the process is in progress are shown. UP ARROW DOWN ARROW BUTTON FUNCTION ON-OFF... -
Page 11: Language Setting
LANGUAGE SETTING The following languages can be handled: English, Swedish, Norwegian, Danish, Finnish, Italian, French, German, Spanish, Portuguese and Dutch. Make sure that the main ON/OFF Step through to the desired switch on the drying cabinet is off . language with the UP ARROW or The display is unlit. -
Page 12: Placement
PLACEMENT There must be an earthed socket ■ within 2m from the lower part of the drying cabinet. The drying cabinet has a 2m long earthed lead with a plug connected at the bottom. The power socket should be located such that there is no need for an extension cable. -
Page 13: Unpacking
Styrofoam must be kept out of damage incurred in transit must be the reach of children. reported to the ASKO within 7 days. After unpacking, check that the product is intact. Damage, defects and any missing parts must be reported to the dealer. -
Page 14: Condensation Water
CONDENSATION WATER Condensation water may be removed in two ways: Collected in a detachable water tank or, ■ Via a hose to the floor drain. ■ DETACHABLE WATER TANK PLEASE NOTE The water tank is designed to be suffi ciently large for a complete wash by a comfortable margin. -
Page 15: Connection To Floor Drain
CONNECTION TO FLOOR DRAIN The drying cabinet is supplied from the factory with a hose to the detachable water tank. To change to removal of condensation water to the fl oor drain, proceed as follows: Hose to the detachable water tank Cabinet viewed from rear Position the drain hose in one of the... -
Page 16: Reconnection To Water Tank
Route the drain hose to the drain. If the drain is higher than the outlet on the cabinet, make sure that the hose runs to the fl oor in an arc and forms a trap. There is otherwise a risk of the condensation water fl... -
Page 17: Installation
INSTALLATION POSITIONING AND SECURING TO THE WALL The drying cabinet is intended only for location indoors in a dry place. Fixing bracket The drying cabinet must not be placed in an environment in which high-pressure water is used for cleaning. LEVELLING The drying cabinet must be level on a Top of drying... -
Page 18: Electrical Connection
ELECTRICAL CONNECTION The manufacturer cannot be held liable if the electrical connections are The drying cabinet must be connected not carried out as prescribed in this to a 230V single-phase 50Hz and manual. protectively earthed wall socket. The drying cabinet is supplied ready for If the power cord for any reason is connection with a cable and an earthed damaged, it must be replaced. -
Page 19: Start-Up
START-UP Read this User Manual CAUTION! before using the drying Read the safety instructions on page cabinet for the fi rst time. 5 before using the cabinet. Make sure that the cabinet is fi rmly attached to the wall. See page 18. Ensure that all packaging material has been removed from the inside and outside of the drying cabinet. -
Page 20: Operation
OPERATION There are three sections with hangers in the cabinet. Each section has a number of rails for hanging items to dry. Hang the items in the drying cabinet according to how much space they require ■ - not according to their weight. Fold up the two bottom hanger sections if long items are to be dried. -
Page 21: User Tips
USER TIPS Always following the washing instructions on the item of clothing if present. ■ If a fabric conditioner or anti-static agent is used, follow the manufacturer’s ■ instructions for use of this product. Remove washing that it is already dry. This will reduce drying time for remaining ■... -
Page 22: Drying Programs
DRYING PROGRAMS The drying cabinet is equipped with two automatic programs for the drying process: NORMAL DRY ■ EXTRA DRY ■ The programs automatically close the drying process when the fabrics are dry. SELECTION OF DRYING PROGRAM NORMAL DRY – Used for drying of items of normal thickness. ... -
Page 23: Starting Drying Program
STARTING DRYING PROGRAM LAST USED DRYING PROGRAM ■ Press the on/off switch to the “ON” position - Indicated by the display lighting up and showing the last run program. If you want this, press START/STOP. Or select another drying program by stepping through with the buttons ARROW UP or ARROW DOWN. -
Page 24: Ending Drying Program
END OF PROGRAM ■ When the cool-down period has ended, the drying process is fi nished, and the “end” display shows the text (fl ashing). When the START/STOP button is then pressed, the current program ends and the display shows the last used program. PLEASE NOTE PLEASE NOTE In standby mode the display goes off... -
Page 25: Program
OPTIMISING THE DRYING PROGRAM You can optimise the two automatic programs for the best possible result. The setting is adjusted on the control panel for the program concerned. Adjustments must be made if it is found that the: Washing does not dry suffi ciently. ■... -
Page 26: Procedure
PROCEDURE Setting to optimise the drying cabinet’s automatic program is done using the buttons on the control panel when the drying cabinet is in programming mode. PROGRAMMING MODE Make sure that the main ON/OFF switch on the drying cabinet is turned off . ■... -
Page 27: Parameter List
PARAMETER LIST Parameter Name Factory Designates pre-set value value P105 Language 1 1=Swedish Setting see page 10 P115 Child lock 0 = Child lock OFF On/Off 1 = Child lock ON P2071 Extra dry Control EXTRA DRY drying program P2072 Normal Control NORMAL DRY drying program... -
Page 28: Care
CARE CLEANING REPLACEMENT PART PLEASE NOTE If the mains lead for any reason is Do not use high-pressure cleaning. damaged, it must be replaced. A genuine spare part can be obtained from the dealer who supplied the PLEASE NOTE cabinet. Cleaning and maintenance must not be performed by children without PLEASE NOTE... -
Page 29: Service
This information can be found on the drying cabinet located inside the cabinet. Identifi cation plate (inside) ASKO DC7784HP Name of the drying cabinet Article number Serial number (12 digits) The illustration shows the identifi cation plate for the DC7784HP drying cabinet 859149au_en.indd 29... -
Page 30: Troubleshooting
TROUBLESHOOTING Questions Action The drying cabinet 1. Check that the mains lead is connected to a power is not working. socket. 2. Check that no fuse has tripped. 3. Have you pressed the start button? 4. Is the door closed? 5. - Page 31 Questions Action The display shows 1. Check that the door closes tightly so that the door switch CLOSE DOOR is activated. (Located at the bottom of the cabinet on the cover plate in front of the heat pump unit). 2. If necessary, try to tape the switch in position and check whether the warning on the display disappears.
-
Page 32: List Of Error Codes
LIST OF ERROR CODES Describes relevant error codes for this product. Name Description ERROR 03 Fault on moisture Sensor is outside its measurement sensor range. Contact Service. ERROR 04 Max time process Max time for drying process exceeded (pre-set value 240min can be changed with parameter P 2073). -
Page 33: Technical Data
TECHNICAL DATA Capacity: 5.0kg laundry (cotton) Dewatering capacity: 22g/min Electrical supply: Single-phase 220-240V, 50Hz, 10A Power: 900W Capacity of main fan: 945m³/h (free blow) Capacity of sub-fan: 160m³/h (free blow) Hanging length: 16 metres Dimensions: DC7784HP: Height 1840mm 1855mm incl. hinge Width 595mm Depth... - Page 34 ENERGY CONSUMPTION AND DRYING TIMES IN DRYING OF SPUN LAUNDRY *) Program Energy consumption Drying time Temp. max kWh/kg laundry NORMAL DRY 90min 55°C EXTRA DRY 120min 55°C *) Values may vary depending on: - spin speed - temperature, air humidity in the room - air circulation in the room (supply air, exhaust air) MANUFACTURING STANDARDS See cabinet identifi...
- Page 35 859149au_en.indd 35 859149au_en.indd 35 17. 02. 2022 08:51:31 17. 02. 2022 08:51:31...
- Page 36 We reserve the right to make changes. ASKO DC7784HP.W.AU en (02-22) 859149au_en.indd 36 859149au_en.indd 36 17. 02. 2022 08:51:31 17. 02. 2022 08:51:31...