Procedure; Return To Operating Mode - Asko DC7784HP.W.AU User Manual

PROCEDURE

Setting to optimise the drying cabinet's automatic program is done using the
buttons on the control panel when the drying cabinet is in programming mode.
PROGRAMMING MODE
Make sure that the main ON/OFF switch on the drying cabinet is turned off .
■
The display is unlit.
Hold down the UP ARROW and DOWN ARROW buttons simultaneously
■
and press the ON/OFF switch. The display lights up and shows the fi rst setting
parameter according to the list below.
ZK
1
Step through to the relevant parameter by pressing the UP ARROW or DOWN
ARROW key repeatedly. If you go too far, simply continue stepping through until
the display shows the correct parameter.
2
When the display shows the correct parameter, for example
confi rm parameter selection. The row now fl ashes with the set value of the parameter.
3
Increase or reduce the parameter value using the UP ARROW or DOWN ARROW
key.
4
To save the set value, press OK.

RETURN TO OPERATING MODE

To return to operating mode, press DOWN ARROW and then OK.
+
26
859149au_en.indd 26 859149au_en.indd 26
+
VK
p105
"P 2072"
, press OK to
17. 02. 2022 08:51:25 17. 02. 2022 08:51:25