Connection To Floor Drain - Asko DC7784HP.W.AU User Manual

CONNECTION TO FLOOR DRAIN

The drying cabinet is supplied from the factory with a hose to the detachable water
tank.
To change to removal of condensation water to the fl oor drain, proceed as follows:
Cabinet viewed from rear
Position the drain
hose in one of the
recesses in the
sheet metal
1
Carefully pull the upper part of the hose
out around 2-3cm.
2
Trim the hose in the middle of the
opening.
3
Install the new drain hose with the nipple
supplied in the assembly kit as illustrated.
Push the hose on without hose clips.
4
Position the drain hose in one of the
recesses in the sheet metal so that there
is no risk of the hose being crushed.
859149au_en.indd 15 859149au_en.indd 15
Nipple
New hose to
drain
Trimmed
hose from
condensation
water pump
Hose to the
detachable
water tank
Hose from
condensa-
tion water
pump
15
17. 02. 2022 08:51:19 17. 02. 2022 08:51:19