Connection To Floor Drain - Asko DC7784HP.S.UK User Manual

CONNECTION TO FLOOR DRAIN

The drying cabinet is supplied from the factory with a hose to the detachable water tank.
To change to removal of condensation water to the fl oor drain, proceed as follows:
Cabinet viewed from rear
Position the drain
hose in one of the
recesses in the
sheet metal
1
Carefully pull the upper part of the hose out
around 2 - 3 cm.
2
Trim the hose in the middle of the opening.
3
Install the new drain hose with the nipple
supplied in the assembly kit as illustrated. Push
the hose on without hose clips.
4
Position the drain hose in one of the
recesses in the sheet metal so that there is
no risk of the hose being crushed.
18
New hose to
drain
Trimmed
hose from
condensation
water pump
Hose to
the de-
tachable
water tank
Hose from
condensa-
tion water
pump
Nipple