Siemens SIMATIC Ident Function Manual page 38

Configuring the instructions
4.5 Programming instructions
Figure 4-9
Table 4- 18 Explanation for the instruction "AdvancedCMD"
Parameter
CMDSEL
CMDREF
IDENT_DATA
38
Instruction "AdvancedCMD"
Data type
INT
IID_CMD_STRUCT
[10]
SINT[10]
Default values Description
1 Selection of the command to be
executed "CMDREF";
1 ⇒ 1. Command, ...
The value of the "CMDSEL" parame-
ter can never be > 100.
-- You will find a detailed description
of the parameter in the sections:
• "Overview of the commands
(Page 72)"
• "Command structure (Page 74)"
0 Buffer for data to be written or read.
Note:
When necessary, an array of any size
can be transferred to this parameter.
Note that the array must be ≥ 10
bytes long (e.g. "SINT[12400]").
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 07/2020, C79000-G8976-C410-04