Yaesu FTM-400XDR/DE Operating Manual page 165

9
Touch [DATA] to select the band to be used for the
packet communication
The setting changes as follows each time it is
touched.
"A-BAND FIX" → "B-BAND FIX" → "A=TX/B=RX" →
"A=RX/B=TX" → "MAIN BAND" → "SUB BAND"
Tips • Refer to "Data communication settings" (
details.
• Factory default value: B-BAND FIX
10
Touch [BACK]
11
Select and touch [3 DATA SPEED]
The screen for the detailed settings will be displayed.
12
Touch [DATA] to select the packet communication
speed
The setting will switch between "1200 bps" and "9600
bps" each time it is touched.
Tip Factory default value: 1200 bps
13
Touch [BACK]
14
Select and touch [4 DATA SQUELCH]
The screen for the detailed settings will be displayed.
15
Touch [DATA] to select the squelch detection method
for the packet communication
The setting switches between "RX BAND" and "TX/
RX BAND" each time it is touched.
Tips • Refer to "Data communication settings" (
details.
• Factory default value: RX BAND
Using the Radio with an External Device Connected
P.196) for
P.196) for
165