Table of Contents
Advertisement
5
Touch [6 RPT SHIFT FREQ]
The characters of the set value will turn green in
color.
6
Press
for one second or longer
The offset of the repeater shift function will be set and the display will return to the
previous screen.
Setting the frequency step
The change in the frequency when the tuning knob is turned, or when the key is pressed
can be set.
Refer to "Changing the frequency step" (
Setting the volume of the beep
The confirmation sound (beep) that goes off when a key is pressed can be changed.
Refer to "Changing the beep volume" (
Setting the clock shift of the CPU
The clock signal of the CPU can be changed so that it is not heard as an internal
spurious signal by the receiver. Select "A" during normal operation.
1
Press
for one second or longer
The set-up menu will be displayed.
2
Touch [CONFIG]
3
Touch [9 CLOCK TYPE] to set the clock type
The setting switches between "A" and "B" each time
it is touched.
A: The clock shift operation will automatically switch
on and off.
B: The clock shift will be kept in operation at all
times.
Tip
Factory default value: A
P.41) for details.
P.54) for details.
Using the Set-up Menu
191
Advertisement
Table of Contents
