Table of Contents
Advertisement
Using the Set-up Menu
6
Press
for one second or longer
The operating band of the APRS and data communication will be set and the display
will return to the previous screen.
Setting the baud rate of the APRS and data communication
The baud rate of the APRS (internal modem) and data communication (when using the
[DATA] jack at the back of the main body) can be set.
1
Press
for one second or longer
The set-up menu will be displayed.
2
Touch [DATA]
3
Touch [3 DATA SPEED]
The screen for the detailed settings will be displayed.
4
Touch [APRS] to select the packet communication
speed
The setting will switch between "1200 bps" and "9600
bps" each time it is touched.
1200 bps: Sets the speed as AFSK 1200 bps packet.
9600 bps: Sets the speed as GMSK 9600 bps
packet.
Tip
Factory default value: 1200 bps
5
Touch [DATA] to select the data communication
speed
Repeat Step 4 to set the data communication speed.
Tip
Factory default value: 1200 bps
6
Press
for one second or longer
The baud rate of the APRS and data communication will be set and the display will
return to the previous screen.
200
Advertisement
Table of Contents
