Table of Contents
Advertisement
Sending and Receiving Messages and Pictures
5
Touch [FORWARD]
Transmission of the picture will start and the icon on
the left side of the address will blink. The sending
and receiving indicator at the top left of the screen
will also change to red.
"Completed" will be displayed when sending of the
picture is completed and the display will then return
to the picture list screen. The tag of the transmitted
picture will be added to the top of the list.
Tips
• Transmission of a picture will be stopped when [PTT] of the microphone is pressed during
transmission (it may take a certain period of time until the transmission stops).
• When sending a picture, the communication mode will automatically switch to the VW mode (high
speed data communication mode). At the end of the transmission, the mode will automatically revert
to the DN mode of the AMS.
Replying to a message or picture
Return messages can be sent in reply to messages and pictures received.
1
Press
The function menu will be displayed.
2
Touch [LOG]
Tip
When [LOG] is not displayed in the function menu, touch
[BACK] or [FWD] to switch the menu.
The list of data will be displayed.
3
Turn
, or touch the screen to select the message or picture that you want to reply
Tip
A list of the messages is displayed when the touch key is
pictures when the screen is touched and changed to
134
. This will be changed to a list of
.
Advertisement
Table of Contents
