Table of Contents
Advertisement
Setting the output condition of the squelch detection and squelch terminal
The squelch detection condition during APRS (internal modem) operation and squelch
terminal output condition of the data communication (when using the [DATA] jack at the
back of the main body) can be set.
1
Press
for one second or longer
The set-up menu will be displayed.
2
Touch [DATA]
3
Touch [4 DATA SQUELCH]
The screen for the detailed settings will be displayed.
4
Touch [APRS] to select the squelch detection
condition during APRS operation using the internal
modem
The setting switches between "RX BAND" and "TX/
RX BAND" each time it is touched.
RX BAND: Transmission is not possible when the
receive band squelch is open.
TX/RX BAND: Transmission is not possible when
either the receive band or transmit
band squelch is open.
Tip
Factory default value: RX BAND
Using the Set-up Menu
201
Advertisement
Table of Contents
