Setting The Auto Repeater Shift; Setting The Direction Of The Repeater Shift - Yaesu FTM-400DR Operating Manual

auto repeater shift
When communicating using the repeater, the repeater auto shift function automatically
shifts the transmit frequency to match the repeater input frequency This allows the
repeater to be used by simply tuning the FTM-400DR to the repeater output frequency
This setting may turned ON or OFF.
1
Press for one second or longer
The set-up menu will be displayed.
2
Touch
3
Touch
The setting will switch between "ON" and "OFF" each
time it is touched.
ON: The auto repeater shift function will be switched
on.
OFF: The auto repeater shift function will be switched
off.
Tip Factory default value: ON
Press for one second or longer
The auto repeater shift will be set and the display will return to the previous screen.
direction of the repeater shift
The direction of the repeater shift function can be set.
1
Press for one second or longer
The set-up menu will be displayed.
2
Touch
186
to select ON/OFF