Setting The Time Zone (3 Time Zone); Using The Auto Repeater Shift Function (4 Auto Repeater Shift) - Yaesu FTM-100DR Operating Manual

Setup menu operations: 8 CONFIG

Setting the time zone (3 TIME ZONE)

The internal clock can be synchronized with the Coordinated Universal Time via GPS.
The time zone can be set at 0.5 hour increments within the range of ±14 hours.
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [8 CONFIG], then press
.
3
Rotate the DIAL to select [3 TIME ZONE], then press
.
4
Rotate the DIAL to select the time zone.
The time zone can be set at 0.5 hour increments
within the range of ±14 hours.
Tip The default setting: UTC ±0:00
5
Press and hold
Sets the time zone and returns the display to the previously viewed screen.

Using the auto repeater shift function (4 AUTO REPEATER SHIFT)

When communicating using a repeater channel, the repeater offset frequency may
be automatically set just by tuning the VFO to the repeater frequency. The automatic
repeater shift function may be changed between ON and OFF.
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [8 CONFIG], then press
.
3
Rotate the DIAL to select [4 AUTO REPEATER
SHIFT], then press
4
Rotate the DIAL to select the desired setting.
1 ON: Activates the auto repeater shift function.
2 OFF: Deactivates the auto repeater shift function.
Tip The default setting: 1 ON
5
Press and hold
Applies the auto repeater shift function setting and returns the display to the
previously viewed screen.
136
for over one second.
for over one second.
for over one second.
.
for over one second.