Table of Contents
Advertisement
Replacing the high beam bulb (halogen projector headlights)
Fig. 190 Changing the bulb for the main beam
Read and observe
and
on page 186 first.
Remove the holder of the wash water container nozzle before replacing the
lamp in the right headlight
» page
›
Remove the protective cap
» Fig. 182
B
›
Turn the holder with the bulb in the direction of arrow
›
Remove the holder with the bulb in the direction of arrow
›
Remove the bulb from the holder in the direction of the arrow
›
Insert a new bulb into the connector so that the lug
snaps into the groove on the bulb.
›
Insert the connector with the new bulb into the headlight in the opposite di-
rection to the arrow
.
2
›
Turn the connector with the new bulb in the opposite direction to the arrow
until it stops.
1
›
Fit protective cap
» Fig. 182
on page 186.
E
After changing the lamp in the right headlamp, replace the holder of the wash
water container nozzle
» page
187.
190
Do-it-yourself
All manuals and user guides at all-guides.com
187.
on page 186.
» Fig.
190.
1
.
2
.
3
on the connector
A
Replacing the turn signal switch bulb (halogen projector
headlights)
Fig. 191 Changing the bulb for the turn signal light
Read and observe
and
on page 186 first.
To replace lamp, first remove the bracket of the wash water container nozzle
in the right headlight
» page
187.
›
Remove the protective cap
» Fig. 182
B
›
Remove the bulb holder with the bulb by jiggling it out in the direction of the
arrow
» Fig.
191.
1
›
Grasp the lamp socket at the places marked by arrows.
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Push a new bulb into the bulb holder up to the stop.
›
Replace the bulb holder in the headlamp with the bulb.
›
Fit protective cap
» Fig. 182
on page 186.
E
After changing the lamp in the right headlamp, replace the holder of the wash
water container nozzle
» page
187.
on page 186.
.
2
Advertisement
Chapters
Table of Contents
