Table of Contents
Advertisement
CAUTION
Do not use polish on plastic parts.
Rubber seals
Read and observe
and
on page 142 first.
All door seals and window guides are factory-treated with a colourless matt
varnish layer against a freezing to painted body parts and against road noise.
CAUTION
Do not treat the door seals or window guides with any cleaning agent.
■
An additional treatment of the seals can attack their protective coating and
■
road noise may be generated.
Chrome parts
Read and observe
and
on page 142 first.
First clean the chrome parts with a damp cloth and then polish them with a
soft, dry cloth.
If this method does not completely clean chrome parts, use a specific chrome
care product.
CAUTION
Do not polish the chrome parts in a dusty environment - there is a risk of
scratching the finish.
Decorative films
Read and observe
and
on page 142 first.
Wash the films with a mild soap solution and clean, warm water.
The following instructions must be observed for the high-pressure washing
the vehicle.
›
The minimum distance between the nozzle and the vehicle body should be
50 cm.
›
Keep the jet perpendicular to the film surface.
›
The maximum water temperature is 50 °C.
›
The maximum water pressure is 80 bar.
All manuals and user guides at all-guides.com
■
faces with films - there is a danger of film damage.
■
from the areas to which films have been applied. Do not remove frozen snow
or ice using other objects - there is a risk of damage to the film.
Windows and external mirrors
Removing snow and ice
Use a plastic ice scraper for removing snow and ice from the windows and mir-
rors.
The ice scraper can be found on the inside of the fuel filler flap.
›
›
Cleaning windows
Clean the windows regularly with clean water, inside and out.
Dry the glass surfaces with a clean chamois leather or a cloth intended for this
purpose.
Instructions for removing snow and ice
■
tion to avoid any damage to the surface of the glass.
■
and salt must not be removed from the window glass and mirrors – risk of
damage to the surface of the windows and mirrors.
CAUTION
Never use aggressive cleaning agents or chemical solvents for the glued sur-
No ice scrapers should be used in the winter months to remove ice and snow
Read and observe
and
on page 142 first.
Open the fuel filler flap.
Slide out the ice scraper in the direction of the arrow
CAUTION
The ice scraper should not be moved forward and backward but in one direc-
Snow or ice that is contaminated with coarse dirt such as fine gravel, sand,
Fig. 142
Fuel filler flap: Remove ice scra-
per
» Fig.
142.
143
Care and maintenance
Advertisement
Chapters
Table of Contents
