Table of Contents
Advertisement
›
Turn the key
in the direction of arrow
A
upwards
» Fig.
135.
›
Remove the key in the direction of the arrow
›
Fit and press in the cap
on the hand-wheel lock in the direction of the ar-
B
row
»
.
3
›
Check the ball head for secure mounting
CAUTION
After removing the key, always replace the cover on the lock – risk of lock get-
ting dirty.
Check proper fitting
Read and observe
and
on page 129 first.
Check that the ball head is fitted properly each time before use.
Correctly secured ball rod
» Fig. 136
The ball head does not come out of the mounting recess even after heavy
"shaking".
Operating lever
is located as far up as possible.
A
The release pin
is completely exposed (both its red and green parts are
B
visible).
The key is removed.
The cap
is on the hand-wheel.
B
WARNING
Do not use the towing equipment unless the ball head has been properly
locked - risk of accident.
132
Driving
All manuals and user guides at all-guides.com
so that the green marking points
1
.
2
» page
132, Check proper fitting.
Fig. 136
Correctly secured ball head
Removing the bar ball - first step
Fig. 138 Insert the key into the lock / unlock the lock
Read and observe
and
on page 129 first.
›
Remove the cover
from the lock in the direction of the arrow
A
›
Insert the key
into the lock in the direction of arrow
B
marker points upward
» Fig.
138.
›
Turn the key in the direction of arrow
wards.
WARNING
Never remove the tow bar while the trailer is still coupled.
Note
We recommend that you put the protective cap on the ball before removing
the ball head.
Fig. 137
Remove the cap from the lock
» Fig.
1
, so that its green
2
so that the red marking points up-
3
137.
Advertisement
Chapters
Table of Contents
