Folding / Securing
Fig. 94 Fold up variable loading floor / secure variable loading floor
For easier handling, e. g. with the spare tyre, the variable load floor can be fol-
ded up and fastened by means of a hook on the frame of the boot lid.
The variable loading floor can be folded up in both positions (both upper and
lower) and fastened.
›
Grasp the variable loading floor at handle
›
Place the variable loading floor in the direction of the arrow.
›
Hook the
hook to the frame of the boot lid.
B
WARNING
The folded-up variable cargo floor limits the driver's view to the rear.
CAUTION
Before closing the tailgate, the variable loading floor is to be unhooked from
the frame and set in the upper or lower position - there is a risk of damage to
the hook.
Bicycle carrier in the luggage compartment
Introduction
This chapter contains information on the following subjects:
Install/remove crossmember
Fitting/removing the bike rack
Place bicycle into the carrier
Ensure the stability of the bicycles with a belt
All manuals and user guides at all-guides.com
» Fig.
94.
A
91
92
93
93
Up to two bicycles can be transported in a carrier in the luggage compartment.
Maximum size of the transported bikes: 19 "frame with 26" wheels.
Before transporting, the following steps must be taken.
›
Remove the roll-up cover
» page
›
Push the head rests into the seat backrests until they click into position
» page
72.
›
Fold the rear seat forward
» page
›
Fold the rear seat backrests forward
WARNING
When transporting bicycles, ensuring the safety of the passengers is para-
mount.
CAUTION
Take care handling the bicycle - there is a risk of damaging the vehicle.
■
The bike rack cannot be installed if the variable cargo floor is stowed in the
■
luggage compartment.
Install/remove crossmember
Fig. 95 Install crossmember: Loosen the screws and unlock brackets /
place crossmember on the lashing eyelets
88.
75.
» page
74.
Transporting and practical equipment
91