Honda EU30i Manual page 40

Hide thumbs Also See for EU30i:
Table of Contents

Advertisement

ENGINE OIL LEVEL CHECK
Place the generator on a level surface.
Open the oil maintenance cover (1).
Remove the oil filler cap (2), and wipe the oil level
gauge clean.
Insert the oil filler cap without screwing it into the oil filler
neck (3).
Remove the oil filler cap and check the oil level shown
on the oil level gauge.
If the oil level is low, fill with the recommended oil to the
upper level of the oil filler neck.
Recommended oil:
SAE10W-30 API service classification SE or later
Oil is a major factor affecting performance and service
life. Use 4-stroke automotive detergent oil.
SAE 10W-30 is recommended for general use. Other
viscosities shown in the chart may be used when the
average temperature in your area is within the
recommended range.
Tighten the oil filler cap securely.
Reinstall the oil maintenance cover.
ENGINE OIL CHANGE
Drain the engine oil while the engine is warm. Warm oil
drains quickly and completely.
Place the generator on a level surface.
Open the oil maintenance cover.
Remove the oil drain plug (1) from the under cover.
(2)
(3)
(1)
(3)
SAE VISCOSITY GRADES
AMBIENT TEMPERATURE
MAINTENANCE
UPPER LEVEL
(1)
3-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eu3000i

Table of Contents